欧美国产日韩一区二区不卡免费

<menuitem id="fnw18"></menuitem>
  • <track id="fnw18"></track>

      <tbody id="fnw18"></tbody>
      <track id="fnw18"></track>
      <nobr id="fnw18"></nobr>
      1. <tbody id="fnw18"></tbody>
                  1. <track id="fnw18"></track>

                      泰安揚帆數控科技有限公司為您提供等相關信息發布和資訊展示,敬請關注!
                      咨詢服務熱線:
                      13345281377

                      新聞資訊

                      產品

                      行業新聞

                      山東自動焊接設備主要溝通及特點

                      來源:http://www.akamaixd.net/  發布時間:2023-12-25 瀏覽次數:0

                      焊接電源。其輸出功率和焊接特性應與擬用的焊接工藝方法相匹配,并裝有與主控制器相連接的接口。

                      Welding power supply. Its output power and welding characteristics should match the proposed welding process method and be equipped with an interface connected to the main controller.

                      送絲機及其控制與調速系統。對于送絲速度控制精度要求較高送絲機,其控制電路應加測速反饋。CRT運動控制系統主要的特點是對速度模擬量電流信號進行有效的控制調節。

                      Wire feeder and its control and speed regulation system. For wire feeding machines with high precision requirements for wire feeding speed control, speed feedback should be added to their control circuit. The main feature of the CRT motion control system is to effectively control and adjust the speed analog current signal.

                      20220630093340539.jpg

                      焊接機頭用其移動機構。其由焊接機頭,焊接機頭支承架,懸掛式拖板等組成,地于精密型焊頭機構,其驅動系統應采用裝有編碼器的伺服電動機。

                      The welding machine head uses its moving mechanism. It consists of a welding head, a welding head support frame, a suspended drag plate, etc., and is located in a precision welding head mechanism. Its driving system should use a servo motor equipped with an encoder.

                      焊件移動或變位機構。如焊接滾輪架,頭尾架翻轉機,回轉平臺和變位機等,精密型的移動變位機構應配伺服電動機驅動。

                      Welding component movement or displacement mechanism. Precision mobile displacement mechanisms such as welding roller frames, head and tail frame flippers, rotary platforms, and displacement machines should be driven by servo motors.

                      焊件夾緊機構。

                      Welding clamping mechanism.

                      CRT主控制器(CRT運動控制器)。亦稱系統控制器,主要用于各組成部分的聯動控制,焊接程序的控制,主要焊接參數的設定,調整和顯示。必要時可擴展故障診斷和人機對話等控制功能。

                      CRT main controller (CRT motion controller). Also known as a system controller, it is mainly used for the linkage control of various components, the control of welding programs, and the setting, adjustment, and display of main welding parameters. If necessary, control functions such as fault diagnosis and human-machine dialogue can be extended.

                      計算機軟件。焊接設備中常用的計算機軟件有:編程軟件,功能軟件,工藝方法軟件和系統等

                      Computer software. The commonly used computer software in welding equipment includes programming software, functional software, process method software, and expert systems

                      焊頭導向或跟蹤機構?;鹤詣涌刂破?,焊槍橫擺器和監控系統。

                      Welding head guidance or tracking mechanism. Arc voltage automatic controller, welding gun sway device, and monitoring system.

                      輔助裝置。如送絲系統,循環水冷系統焊劑回收輸送裝置焊絲支架電纜軟管 。

                      Auxiliary devices. Such as wire feeding system, circulating water cooling system, flux recovery and conveying device, wire support cable hose.

                      感謝您的閱讀,此文的文章來源:山東自動焊接設備更多的內容和問題請點擊:http://www.akamaixd.net我們會繼續努力的為您提供服務,感謝您的支持!

                      Thank you for reading. The source of this article is Shandong Automatic Welding Equipment. For more information and questions, please click: http://www.akamaixd.net We will continue to work hard to provide you with services. Thank you for your support!

                      上一篇:使用全自動焊接設備的注意事項!
                      下一篇:自動焊機的結構組成有哪些?

                      <menuitem id="fnw18"></menuitem>
                    1. <track id="fnw18"></track>

                        <tbody id="fnw18"></tbody>
                        <track id="fnw18"></track>
                        <nobr id="fnw18"></nobr>
                        1. <tbody id="fnw18"></tbody>
                                    1. <track id="fnw18"></track>